Linde ECR Series | Linde ECR60 & ECR80 Pallet Trucks

	*ECR Series*
	*ECR60 ECR80*
	*6,000 LB. - 8,000 LB. Base Capacity*

	Models:	ECR60, ECR80
	Capacities:	6,000 LB., 8,000 LB.
	Fuel type:	Electric - 24 Volt
	Tire type:	Cushion
	Drive type:	GE SEM control
	Steering:	Heavy duty cast steer handle with soft touch twist grips (power steering is an available option)
	Brakes:	Brakes are applied by levers built into the steer handle

Time-tested and proven components used in combination with modern electronic, mechanical and ergonomic design concepts have resulted in a truly exceptional machine.

Standard equipment:

Programmable microprocessor-based G.E. Transistor Travel Control

G.E. SEM drive motor

Regenerative braking

Ramp anti-rollback

7/8" nickel-plated linkage pins

Operator presence switch

Heavy-duty, Teflon-coated, oil-impregnated linkage bushings

Rubber anti-fatigue floor mat

Key switch and horn

Lift cutout at maximum fork height

Knee pad

Lean seat

On-board diagnostics

Sealed harness connectors

Yellow zinc-plated casters

Soft touch handle

Design
Maximum operator comfort and productivity define the design parameters of this truck series. The ECR model features a large, fully-cushioned operator platform. All models are equipped with soft-touch operator accelerator control twist grips as well as an adjustable steering column.

Frame
Truck frames feature fixed platform height and all seam-welded unitized construction. Plate steel contoured to shape for rigid strength provides maximum durability and protection for all vital components. The battery compartment is an integral part of the chassis, further adding strength to the frame.

Forks
All forks are heavy-duty, one-piece channel fork design. All forks feature wide skid bars, sloped toes and bolt-on pallet entry/exit rollers for improved performance.

Fork linkage
High strength, solid steel, rectangular tie bars connect the load wheel shackles to the lifting toggles. The 7/8 in. diameter linkage pins and Teflon-coated/oil-impregnated linkage bushings are designed to withstand severe shock and stress. Zerk grease fittings are standard for fast lubrication and are accessible while the truck(s) are in the upright position.

Drive motor
The 24-volt equipped ECR model features a G.E. separately excited drive motor (SEM). These high performance motors, featuring class H insulation, are open-ventilated for energy efficient, cool operation. Excellent performance, dependability, control and lowest possible energy consumption are provided through the utilization of quality materials and the matching of motor to drive system. Four long-life motor brushes interface with the diamond-turned commutator.

Drive unit
The ECR series is fitted with heavy-duty, bottom-mounted Kordel drive units. They feature a top seal turntable bearing with encapsulated ball bearings, easily lubricated from the top down. These high-capacity drive units are precision machined utilizing heat-treated chromium alloy steel gears for maximum life and dependability.

Travel control
Microprocessor-based G.E. transistor travel controls are offered as standard equipment. These ultramodern electronic controls eliminate forward/reverse contactors, numerous relays, resistors and diodes. Standard control features include two unique speed limits, anti-rollback and regenerative braking. The controls are fully programmable to allow for specific application requirements and feature diagnostic capability with stored fault codes. Sealed wiring harness connectors prevent moisture and contaminants from interrupting truck operation in all environments. In combination with the G.E. SEM drive motor, the electronic package delivers unbeatable truck control and performance with unrivalled energy efficiency.

Operator controls
The operator control handle features heavy-duty cast design and construction. Soft-touch accelerator twist grips govern travel direction and speed and feature automatic return to neutral. Integral, easy to use push button control switches actuate lift/lower and horn.

Motor compartment covers
The ECR series features a thermoplastic elastomer one-piece, lift-off motor compartment cover. This style cover is a product of the latest scientific advances in the field of chemistry. In addition to their resistance to rust and corrosion, these covers offer superior impact strength, durability, lifelong proper fit and are made from 100 percent recyclable material. The same rugged material is used today by most large construction machinery OEMs.

Brake system
Smooth, controlled braking is accomplished by one of three methods:

Applying the hand brakes
Auto brake
Regenerative braking

Hydraulic system
An integral hydraulic pump/motor assembly, featuring a large, translucent, poly tank that can be sight checked for hydraulic oil level, is mounted vertically to the truck frame. Pump/motor assembly are well-protected and easy to service.

There are many more benefits the ECR Series can provide for your business.

For more information please contact sales@indylift.com
or visit the Linde Material Handling North America web site.

Linde Forklifts

Cushion Tire - Internal combustion

H16C-H18C-H20C
3,000 LB. - 4,500 LB.