Linde 347 Series Forklifts | Linde Electric Lift Trucks

	*347 Series*
	*E20C/600 E25C/600 E30C E30C/600*
	*4,500 LB. - 6,500 LB. Base Capacity*

	Models:	E20C/600, E25C/600, E30C, E30C/600
	Capacities:	4,500 LB., 5,500 LB., 6,000 LB., 6,500 LB.
	Fuel type:	Electric - 36 or 48 Volt
	Tire type:	Cushion
	Drive type:	General Electric Gen II digital SEM control
	Steering:	Power - hydrostatic
	Brakes:	Wet disc brakes

347 Series four wheel high-performance electric models come with a multitude of advanced standard features.

Standard equipment:

Control electronics with integrated microprocessor for infinitely variable and highly economical control of travel speeds as well as working hydraulics and steering hydraulics

Instrument display includes indicator lights for fasten seat belt alert, park, hour meter, maintenance alert, drive motor fan, drive motor and lift pump motor brush wear and over temperature

Battery discharge indicator with interrupt; when battery discharge has reached 80%, the electric power supplied to the hydraulic motor is automatically reduced signaling the operator to change/charge the battery

Drivers seat with adjustable backrest angle and lumbar support, automatic power cut-off when the operator leaves the seat, and retractable seat belt

Joystick hydraulic controls built into the cushioned operator armrest

Planetary drive axle with wet disc brakes

Operator compartment
Spacious driver ingress/egress from both sides of the chassis are the hallmarks of the exclusive Linde Ergo-logic design. All controls are located in the drivers Zone of Comfort. The Exclusive Linde Load Control System utilizes a fully adjustable cushioned operator seat armrest incorporating joystick hydraulic controls. The armrest quickly folds up to allow easy operator access from the right side of the chassis. The patented Linde Twin-Pedal Directional Control System provides smooth change of travel directions with feet alone and travel direction contactors are not required. The adjustable bucket seat with back tilt and lumbar support and pivoting steering column complete the package.

Chassis
A seam-welded and unitized truck chassis delivers maximum strength and durability built to survive punishment. All major electronic, mechanical and hydraulic components are housed within the confines of the chassis. Absolutely no components are located under the battery compartment. Maintenance procedures are simplified due to the utilization of a one-bolt quick access design steel formed cover for the electronic controls. All other components are located beneath the rubber covered formed no-bolt floor-plate which is positively retained by the battery compartment top cover. The spring-loaded clamshell style battery compartment cover rotates up and out of the way for quick battery removal/roll-out.

Drive system
Linde’s Exclusive “In-Line” Drive Motor Design places the 36/48 volts separately excited drive motor (SEM) inside the drive axle. Two Exclusive Secondary Thermostatically Controlled Cooling Fans supply the drive motor with cooling air. Dynamic/regenerative braking is a standard feature as are four operator selected performance mode levels. Fully adjustable plugging capability as well as excellent acceleration, top travel speed and ramping performance plus infinite truck inch-ability define this ultramodern drive system. A single pump/motor assembly supplies energy for the working hydraulics and hydrostatic power steering system. The drive axle features Exclusive Planetary Gear Reduction for maximum component life in abusive applications. Major hydraulic components are “shock-mounted”.

Digital control
The Exclusive G.E. GEN II Digital SEM Motor Controller manages available battery current and allows outstanding operator precision and pinpoint accuracy in both truck as well as load handling. A special diagnostics module records all operating data for retrieval by service techs. The comprehensive standard integrated operator display includes fasten seat belt alert, BDI with lift interrupt, parking brake actuation light, hour meter, maintenance alert, drive motor fan indicator, as well as brush wear and temperture warning indicators for the traction/hydraulic motors. Specific vehicle performance characteristics are selected and adjusted by the operator.

Steering system
The Exclusive Linde Steering Axle Design features grease fittings to ensure long life in abrasive/corrosive environments. The totally maintenance free Linde steering axle mounting design is durable and effective in shock/vibration abatement. Ease of steering permits use of exclusive ergonomicallydesigned small diameter steering wheel with just 4.2 turns through full lock.

Mast
Linde’s new generation 186 series simple, dual and triple masts are designed for heavy uses on H-Trucks. These masts feature outer “C” channel design and interlocking “I-Beam” inner sections for maximum strength and optimal driver visibility. All triple masts feature Exclusive Chainless Secondary Lift Staging eliminating chain slack and component/merchandise damage. Cushion mast staging eliminates section banging while lowering the masts.

Brakes
347 series trucks come equipped with the toughest, most durable brake system available in their class. Exclusive Axle Inboard Oil-Bath Disc Brakes deliver unequalled stopping power and a lifetime of reliability with virtually no required maintenance. Standard dynamic/regenerative braking further increases the overall efficiency and durability of the brake system.

Safety
The standard equipment of this model range corresponds to all current safety standards. Of particular interest are the following standard features: